Separate equipment, attachments, assemblies and parts
An excavator website can organise hydraulics, undercarriage, working equipment and attachments beneath the machine category, then connect assemblies, wear parts and service items. A buyer with a part number needs a direct route. A buyer with only a photograph can enter by component type. Both should be able to return to the related machine or assembly.
Titles distinguish product names, manufacturer models, original-equipment references and the supplier’s ordering codes. Meaningful leading zeros, hyphens and suffixes remain intact. Version and replacement relationships follow the documents. Similar appearance still requires comparable dimensional and connection information.
Use H115 GC S and H120 GC S to understand the required detail
Caterpillar lists a 13–18 t carrier range, 90–120 L/min rated flow and 15,000–17,000 kPa operating pressure for the H115 GC S. The H120 GC S lists 18–25 t, 125–150 L/min and 16,000–18,000 kPa. Separate fields let buyers check the requirements against their carrier information.
Carrier weight is one part of selection. The page should also identify the model, serial information, mounting, auxiliary hydraulics and return requirements to collect, with drawings and nameplates for further confirmation. These manufacturer examples illustrate content structure; the supplier’s fitment list should follow its own documented products.
Give each fitment table a source and a checking task
Record confirmed machines or carrier ranges, dimensions, connections, operating conditions, document version and source. Hammer pages emphasise hydraulic and mounting requirements. Jaw plates need crusher model, chamber, position, material and drawing reference. Service kits list their included components. The fields follow the product.
Photographs should identify mounting faces, connections and significant details, with dimensional drawings nearby. Where buyers lack a reference, the page explains which nameplate, overall and installed views to provide so sales can compare them with the documents. The same material helps explain similar-looking variants.
Cover references, models and identification questions
Hydraulic breaker supplier is supplier research; H120 GC S flow rate checks a particular model; excavator hydraulic hammer compatibility investigates fitment. Known references should lead to the corresponding part record, specification questions to technical information, and broad terms to a supply directory. The 200-term plan records those intents and page tasks together.
Equipment businesses searching for parts website SEO or part-number content need to see how the work connects identification, parameters and enquiries. This article leads to our parts-industry approach and SEO service. The equipment-buyer queries demonstrate the content to develop.
Use purchasing prompts to expose missing evidence
A buyer can combine machine, old part and application in one question: “I know the carrier model and need a replacement hammer. What should I give the supplier?” Observe whether AI answers request nameplates, mounting dimensions, flow and pressure documents and whether their model sources agree. The website connects those records with an enquiry route.
Different components need different questions: ports and conditions for hydraulics, material and configuration for wear parts, references and versions for electrical components. Observations retain the tool, date, market and complete question for comparison after content changes.
Publish four social subjects along the identification process
At the start of the month, choose a component and prepare overall images, connection details, drawings and its model page. Four posts explain identification, reading specifications, preparing fitment evidence and requesting a quotation. Facebook emphasises visible identification; LinkedIn adds procurement and maintenance context. The two platforms receive 8 placements monthly, linked to the relevant pages.
Site or shipment images describe the actual publishable transaction. Technical posts use material confirmed by the business. Monthly reports retain posts, destination pages, referral visits and enquiries.
Combine identification and quotation in one enquiry
Buyers supply the machine, reference, photographs or drawing, then quantity, application, destination and timing. The form retains the part and source page so sales sees the context. Without a reference, a buyer can describe the installed position and available material. Sales identifies the product and continues with the configuration and supply details.
Repeated questions about one dimension indicate a page update. Confusion between two versions can produce a comparison. Monthly search, visit and enquiry records guide the next material, with quarterly reviews involving sales and technical staff.
Model specifications and content example
These published specifications illustrate product-information work. Client projects use their actual models and configurations.
| Brand and model | Specification | Published value |
|---|---|---|
| Caterpillar H115 GC SUS / GC S hydraulic hammerManufacturer source | Minimum operating weight | 1,405 kg |
| Rated flow range | 90–120 L/min | |
| Operating pressure range | 15,000–17,000 kPa | |
| Tool shaft diameter | 120 mm | |
| Blow rate | 450–800 blows/min | |
| Caterpillar H120 GC SUS / GC S hydraulic hammerManufacturer source | Minimum operating weight | 1,746 kg |
| Rated flow range | 125–150 L/min | |
| Operating pressure range | 16,000–18,000 kPa | |
| Tool shaft diameter | 135 mm | |
| Blow rate | 400–800 blows/min |
Caterpillar H115 GC S：The published carrier range is 13–18 t; carrier model, mounting, flow, pressure and return conditions must also match. Rock/concrete breaking, roadwork and trenching; specify the material and carrier conditions.
Caterpillar H120 GC S：The stated carrier range is 18–25 t, which does not establish fit on every 320/323 configuration. Roadwork, demolition and breaking tasks; compare hydraulic ranges and installation requirements.
Sources checked: 2026-09-21 · Published models illustrate specification and content work. Client projects use the models and documents in the client’s actual range.
Manufacturer attachment data and page material
| Field | Caterpillar H115 GC S | Caterpillar H120 GC S | Related information |
|---|---|---|---|
| Published carrier range | 13–18 t | 18–25 t | Carrier information and fitment checks |
| Rated flow | 90–120 L/min | 125–150 L/min | Carrier auxiliary-hydraulic documents |
| Operating pressure | 15,000–17,000 kPa | 16,000–18,000 kPa | Hydraulic requirements and literature |
| Tool shaft diameter | 120 mm | 135 mm | Drawing and model identification |
| Blow rate | 450–800 blows/min | 400–800 blows/min | Field explanation and conditions |
Parts searches and destinations
| Query or need | Page | Next task |
|---|---|---|
| hydraulic breaker supplier | Attachment directory and supply details | Find models and availability |
| H120 GC S flow rate | Model hydraulic data and manufacturer sources | Compare carrier data and submit documents |
| excavator hydraulic hammer compatibility | Fitment explanation and model relationships | Collect machine, mounting and hydraulic information |
| carrier model + part name / part number | Documented component record | Check references, dimensions and photographs |
| construction equipment parts SEO | This article, industry approach and services | Submit business URL, range and optimisation needs |
Information for a parts enquiry
| Material | Identification task | Website location |
|---|---|---|
| Machine and attachment nameplates | Model, version and serial information | Enquiry guidance and upload route |
| Part number or old-component marking | Original reference and ordering-code relationship | Title, data and reference notes |
| Mounting, connection and overall photographs | Structure, interfaces and installed position | Gallery and submission guidance |
| Drawing and hydraulic records | Dimensions, flow, pressure and connections | Tables and technical downloads |
| Quantity, destination and timing | Supply, packing and transport arrangements | Quotation form and sales record |
Execution sequence and deliverables
| Stage | Work | Output |
|---|---|---|
| Organise evidence | Collect references, carrier relationships, literature, drawings and photographs with versions. | Verifiable product records |
| Research searches | Group references, models, parameters and buying questions; examine 2–3 competitors. | Keyword-to-page tasks |
| Initial publication | Prepare priority parts and fitment explanations; verify bilingual units, images and form sources. | Product pages and enquiry route |
| Monthly operations | Publish 4 identification/purchasing posts in 8 placements and add information from enquiries. | Publication, search and enquiry report |
| Quarterly review | Discuss identification errors, repeated sales questions and new products. | Next parts-content programme |
Purchasing prompts and page work
Compare Caterpillar H115 GC S and H120 GC S using the published carrier ranges, rated flow, operating pressure and tool shaft diameter. What additional carrier, mounting and hydraulic documents are needed before selecting an attachment for an existing excavator? Cite the manufacturer sources.
Observe: Does the answer distinguish carrier range, attachment dimensions and hydraulics and request mounting evidence?
Content required: Model specifications, sources, carrier-information list, mounting dimensions and hydraulic material.
I need a replacement construction-equipment component but only have an old-part photograph and carrier model. In identification and quotation order, list the nameplate, installed views, dimensions, quantity and delivery information the supplier needs.
Observe: Does the answer create a practical collection sequence and let a buyer without a reference continue?
Content required: Identification guide, photograph examples, drawings, product categories and document-enabled enquiry.
Common questions
Should one part fitting several machines have duplicate pages?
A single complete part page can list documented machine relationships, with links from those machine pages. Different dimensions, versions or supply configurations need their own explanation.
Can a buyer enquire using only an old-part photograph?
Yes. The page should explain the further nameplate, installed-position and dimensional material to collect, while sales continues from the actual identification evidence.
Are flow and pressure enough to state fitment?
Fitment also needs the carrier model, mounting, hydraulic and return conditions. The page should distinguish confirmed model relationships from the information still needed for the check.
References: Caterpillar H115 GC S — manufacturer specifications / Caterpillar H120 GC S — manufacturer specifications